SF flotation machine Features SF flotation machine structure characteristics 1, Impeller with backward-sided blade, can achieve double-loop slurry tank 2, the impeller and cover a larger gap, inspiratory capacity 3, impeller low peripheral speed, long life wearing parts 4 and pitch tank, dead small, foam movement speed performance characteristics, inspiratory capacity, low energy consumption 2, long consumable life 3, SF flotation machine in favor of coarse-grained mineral flotation Highlights mechanical stirring, from breathing, self-absorption pulp can become a joint mechanism with the JJF flotation flotation unit, a suction trough every job application can be used in non-ferrous metals, ferrous metals , and non-metallic mineral sorting, suitable for large and medium-sized flotation plant rougher and scavenging operations. When the SF-type flotation machine principle of rotation of the impeller, the impeller chamber pulp and down under the action of centrifugal force generated vertical blade and thrown to four weeks, the upper and lower impeller cavity to form negative pressure zone. At the same time, cover the upper part of the slurry through the loop hole on the cover is drawn to the impeller cavity is formed on the pulp cycle. The next leaves thrown to the surrounding slurry, the lower pulp supplement to the center, thus forming a cyclic pulp. The air through the intake pipe, the center tube is drawn into the impeller chamber, mixing with the slurry is drawn, forming a large number of small bubbles, after steady flow through the cover plate evenly dispersed in the tank, the formation of mineralized bubbles. Mineralized bubbles float to the foam layer, the foam product is scraped off by a blade.